Large desiccant bags for humidity control

Key Features:

the build plate will heat up to 100 degrees in just 2 minutes (Your printer controller will regulate the power to the build plate to get your preset temperature

Nylon filaments can be a challenging material to FDM print in due to their lower degree of adhesion to conventional build plates and their higher tendency to lift at the corners

The production of the filament comes from a state-of-the-art company that ensures good roundness of the filament and a diameter of +/- 0

KungFuFlex - Hard Flex - 72D - Transparent - 1.75mm - 1kg Kortlæsere mv. Large desiccant bags for humidityKungFuFlex Hard Flex 72D Transparent 1. 75mm 1kg When printing with TPU (Thermoplastic Polyurethane) compared to TPEE (Thermoplastic Polyester Elastomer), there are some advantages that may make TPU a more attractive choice depending on your project: Flexibility : TPU is extremely flexible and can stretch much further than its original length without breaking, making it ideal for projects that require elastic properties. It is part of a group of