18" double-jointed swing spout

5 GAL KILZ II PRIMER

Vent Elbows are used with air gaps for vertical installations of reduced pressure zone assemblies

Inlet hubs are of cast iron construction and custom designed to fit curvature of the basin

Spout Cutter / Seal Puncture Tool / Ladder Hook

<R> 1//2-3/4"RPZ AIR GAP-f/#00f/HORIZONTAL INSTALLATIONS GALV STOVE PIPE REDUCERS 18" double-jointed swing spoutThis air gap for reduced pressure zone assembly, 1 2 IN series 009, 3 4 IN series 009M2 and 009M3, and 1 2 to1 IN series 995, provides an unobstructed, physical separation between the discharge end of a potable water supply line and an open receiving vessel. The installation of an air gap and drain line are recommended on reduced pressure zone assemblies. It can be installed vertically or horizontally (vent elbow required for vertical installation).